Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Stems

Renthal Apex 35
$199.99 - $219.99
- Fully CNC machined - Featuring an oversize center bore - Extensive machining and external webbing to maximize structural strength and stiffness and minimize weight
Renthal Apex Stem
$219.99
- CNC machined 2014 aluminum body and 7075 aluminum clamps - 240 degree wrap-around, twin plate clamping system - External webbing to maximize structural strength - 118-158g including stainless steel bolts
Thomson Elite X4 Mountain Stem
$149.99 - $176.99
The Elite X4 Mountain Stem is instantly recognizable because of Thomson's legendary style, and with strength to spare, this stem is more than just a pretty face. Made from a solid, one-piece block of 7000-series aluminum, the X4 combines exceptional strength with light weight for durable, solid steering control to tame the toughest trails. It has a four-bolt clamp design and reversible graphics, so your X4 looks great whichever way you run it.
Deity Components Intake
$154.99
- CNC Machined from hard high grade 7075 T73 Aluminum - 0 deg rise to keep you low and in control - 69mm wide clamping platform for an incredibly stiff front end - Intended Use: Downhill
Thomson Elite X2 Road Stem
$149.99
Thomson's Elite X2 Road Stem is instantly recognizable because of Thomson's legendary style, and with strength to spare, this stem is more than just a pretty face. Made from a solid, one-piece block of 7000-series aluminum, the X2 combines exceptional strength with light weight for a stiff stem and total control on all your rides. It has a two-bolt clamp design that's just as strong as four-bolt designs thanks to Thomson's interlocking interface and it also cuts down on the weight. Plus, the stem's low 36mm stack height gives you more options for customizing your position. And, thanks to their reversible graphics, your X2 looks great whether you run a positive or negative rise.
Deity Components Copperhead Stem
$129.99 - $144.99
Inspired by the sleek and deadly lines of a Copperhead snake, the sweeping center channels of the Copperhead stem wrap around the entire stem to minimize material while delivering a strong steerer-mounted stem. Deity's focus on durability and dedication to the symmetry between strength and weight is showcased in the balance of style and function that is the Copperhead stem. - Designed for all applications from All MTN to Slopestyle and anything in between - CNC Machined from a solid block of 6061 T6 Aluminum - Exceptionally detailed chamfered edges and channels throughout - Material: Aluminum - Length: 35mm or 50mm - Stem Angle (deg): 0 deg - Weight: 135g. (35mm); 161g. (50mm)
Race Face Atlas 35 Stem
$139.99 - $144.99
RaceFace designed their Atlas 35 stem to reduce overall system weight while retaining the proven stiffness and performance the Atlas line is known for. The stem itself is measurably stiffer than the 31.8mm offering and, although the system is a seemingly burlier build, the weight savings gained by the reduction in bar material actually makes the 35 system lighter overall. An impressively light, strong addition to your aggressive trail or DH/FR build. - Four-bolt bar clamp holds bar securely in position - Interlocking U-Shaped Handlebar Clamp Geometry - Faceplate eliminates stress risers which cause your bar to bend or break - Opposing bolts on steer tube clamp provides extreme clamping power while reducing stress on the steer tube - Stack Height: 40mm
TruVativ Descendant Direct Mount Stem
$141.00
It’s low-slung, stiff, aggressive and serves up support and control the way a direct mount stem should. The Descendant direct mount stem may have been designed to attack the race clock, but it was built tough, to take on whatever comes next. No matter where you take it, this Descendant stem will keep you pointed where you want to go. - Pair with BoXXer fork - Gives DH riders lower more aggressive position - Super-stiff, stable front-end handling - Lightweight - Two-piece design
Deity Components Intake 31.8mm DM
$139.99
Deity's INTAKE Direct Mount DH Stem takes machining and flow to another level! Yet another premium race good designed to make your kit look amazing and perform even better, the INTAKE DM stem is available in a 31.8mm bore and, like its counterpart the INTAKE 35mm DM Stem, it utilizes a 3-piece design for ease of installation and a super-stiff set-up. This DEITY design is the culmination of form and function and hits the sweet spot for your cockpit! - DIRT MAG Top 100 Product for 2018 - 50mm reach - Zero degree rise to keep you low and in control - CNC Machined from a solid block of aluminum - Boxxer Standard platform - 7075 T73 Aluminum - Available in high polished black ano finish - 31.8mm bore clamp for the perfect complement to our new BLACKLABEL 800 Handlebar - 69mm wide clamping platform for an incredibly stiff front end - Covered by our Lifetime Crash Replacement Policy to the original owner - 146 grams
Deity Components Micro DM
$139.99
This tiny package packs a big punch with a minimal design. The MICRO DIRECT MOUNT DH Stem is strong enough to carry the DEITY name while touting one of the lightest designs in the world. There isn't any wasted space on this moto-inspired 4-piece design, but don't let that fool you. Its 65mm super-wide clamping platform delivers incredible stiffness and transfer of power from you to the front wheel. At a compact length of just 30mm, this Boxxer standard 31.8mm stem is the perfect fit for the longer top tube designs of today's DH bikes while offering the flexibility of a flip-flop graphic option for your choice of stealth or flash. There is no shortage of machining detail or design in this mini stem and, as with all DEITY designs, we take extra care to deliver only the best! - CNC machined from hard high-grade 7075 T73 aluminum - Compact 30mm length for the current crop of long downhill frames - Compatible with 31.8mm oversized handlebars - Boxxer standard platform - Moto-inspired 4 piece design - Super-wide 65mm clamping platform for torsional stiffness - Flip flop graphics kit - Hidden front crown bolts - 10mm rise - One of the lightest Direct Mount Stems in the world - High polished finish with chamfer detailing throughout for stunning detail - Weight: 110 grams
Race Face Turbine Stem
$139.99
- Intended for XC, Trail and All Mountain use - Machined to precision with 7075 aluminum for high strength & fatigue resistance at a very light weight - Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts and into the body - Bar Clamp Diameter: 31.8 mm - Stem Angle: -84 deg , +96 deg
Race Face Turbine R 35 Stem
$134.99
Race Face took their super popular Turbine 35mm stem and turned the volume up to R. Increased strength to handle the harshest aggressive all mountain riding combined with an update to 0-degree size for optimized fit and performance. This stem sets the new standard in weight vs strength. - CNC Aluminum - 0-degree rise for perfect fit on aggressive bike frames - Extensive CNC machining for weight reduction without impacting strength - TopLock faceplate design for easy and secure installation
3T Apto Stealth
$129.99
A stem may not seem like the most exciting bike part, but it's in our DNA to care about it in great detail. After all, no other part has such a dramatic effect on your riding position and thus your speed, comfort, and enjoyment. With the APTO, 60 years of innovation and elegance in 3T stem design comes together in a moving sculpture. Steerer Clamp: Double bolts hold the steerer securely and provide redundancy for extra safety. Reverse Faceplate Bolts: These clean up the faceplate for a more elegant design, particularly in combination with our new drop bars. Classic Rubber Logo: The 3D rubber logo is a nod to the iconic 3T stems of yesteryear. - Material: Alloy 6061 - Steerer diameter: 28.6mm (1 1/8") - Handlebar diameter: 31.8mm - Key size: 4mm Allen key - Steerer bolt torque: 5Nm - Faceplate bolt torque: 5Nm
Deity Components Cavity Stem
$129.99
The Cavity stem was developed with pain staking focus on strength, function and attention to detail. Tapered body for cleaner lines and weight reduction, multiple internal and external machining processes to reduce every gram possible and chamfered edges throughout for stunning detail. - Machined from 6061 T6 aluminum - Wide 55mm faceplate for increased stiffness with wide handlebars - Rounded edges at all sides, corners, and angles - Reverse cross bolt system for increased clamping power - Flip flop design for increased range of height adjustment - Pro Installation Tip: Always run the steerer tube all of the way through the stem with a small spacer on top - Bar Clamp Diameter (mm): 31.8 mm - Material: Aluminum - Stem Angle (deg): 0 deg - S.H.I.S. Stem Clamp Diameter: 28.6 - Stack Height: 33 - Weight: 150 g
Spank Split 35 Stem
$119.99 - $120.99
- Highly weight optimized single crown stem for use with 35mm handlebars - Dial your fit with micro increment size options, tuned to fit any rider size and style - Cockpit setup index lasered onto stem helps with tuning of upsweep and backsweep - Ultra-short stack height and true zero-degree rise - Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars - Recommended for: ASTM 5, All mountain, enduro, trail, free ride, E-Bike Specs: - Key Technologies: MGR Alloy, chamfered bar clamp, top-cap included - Material: 6-Series Alloy, 3D forged CNC optimized body - Rise (°): 0 - Diameter: 35mm - Stack height: 34mm - Weight: ±131g (35mm) / ±136g (40mm) ±139g (45mm) ±141g (50mm) - Finish: Shotpeen anodized
Spank Split Stem
$118.99 - $120.99
- Highly weight-optimized single crown stem, ideal for Enduro applications with 31.8mm handlebars - Human Factor Design features micro increment size options, tuned to fit any rider size and style - Human Factor cockpit setup index facilitates tuning of upsweep and backsweep - Ultra-short stack height and true zero-degree rise - Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars - Forged 2-piece faceplate design reduces overall weight without compromising bar clamp security or stiffness - Shot peen-anodized surface increases strength, durability, and fatigue life Features: - Key Technologies: Human Factor Design, MGR Alloy, Chamfered bar clamp, Custom Top-Cap included - Material: 6-Series Alloy, 3D forged CNC optimized body, 2D forged faceplate - Rise (°): 0 - Diameter: 31.8mm - Stack Height: 34mm - Weight: ±133g (33mm) / ±138g (38mm) ±140g (43mm) ±143g (48mm) - Finish: Shotpeen anodized
Race Face Turbine 35 Stem
$119.99
- Intended for XC, Trail and All Mountain use - Machined to precision with 7075 aluminum for high strength & fatigue resistance at a very light weight - Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts and into the body - Bar Clamp Diameter: 35mm - Stem Angle: -84 deg , +96 deg
TruVativ Atmos 7k Stem
$112.00
The Atmos 7k stem is a lightweight performance stem designed for trail and cross-country use and is the lightest stem in the Atmos range. Featuring a rise or drop of 6° depending on your preference, all fasteners are adjustable via a T25 tool for easy, quick adjustments. The Atmos 7k also features an integrated GoPro mount. - ±6° angle - Integrated GoPro mount - T25 fasteners for 1 tool across the cockpit SPECIFICATIONS - Stem Angle/Rise: 6 degrees - Clamp diameter: 31.8mm - Steerer clamp diameter: 1-1/8 in - Hardware: Steel
Cinema BMX Martinez Stem
$104.99
The Martinez stem is inspired by classic-looking top-load stems with key improvements in strength and geometry. A 48mm reach gives a responsive feel while the standard 22mm rise can be reduced to just 8mm by inverting the stem. Six oversized Allen key bolts provide plenty of strength and torque and give the stem a classic well-balanced look and feel. Beveled edges and the tapered body profile give the stem a classic yet unique look. Corey Martinez tested and approved. - Reach: 48mm - Rise: 22mm (8mm Inverted) - Stack Height: 30mm - Material: 6061-T6 Aluminum - Bolts: Solid Oversized w/6mm Allen Hex - Weight: 10.9 oz
Spank Direct 40 Stem
$99.99
Dial your fit with this Direct Mount alloy stem with adjustable reach and height to achieve the ideal stance and balance point - Chamfered bar-clamp zones to reduce stress risers and improve fatigue life of handlebars - CNC weight optimized for 31.8 bars - 2D forged, shot peened and anodized for high strength and low weight - A Snap Fit top cap and laser logos for a refined finish - Recommended for: ASTM 5, All mountain, DH, free ride - LENGTH (mm): 25-30 (adjustable) - RISE: 28-33 (adjustable) - DIAMETER (mm): 31.8 - STACK HEIGHT (mm): n/a - WEIGHT ± (g): 130 - TECHNOLOGIES: Adjustable length/rise, chamfered bar clamp - MATERIAL: 2D forged MGR alloy, CNC weight optimized
Spank Spike 25/30 Direct Mount Stem
$99.99
Adjustable in both reach and rise, Spank's Spike 25/30 DM Stem allows the rider to find the ideal stance and balance point. 2D forged for strength, and CNC optimized to just 135g, this unique direct mount also features chamfered barclamp zones to reduce stress risers and improve fatigue life in any handlebars. As DH frames have gotten longer, shorter and more adjustable, direct mount cockpit designs have become a necessity. Developed with the World's Top DH pros, the Spike 25/30 DM Stem takes DH cockpit tuning to a new level. It's remarkably short reach was accomplished first by SPANK, by bringing the lockdown hardware into the barclamp, while maintaining the ease of set-up and resistance to moving under impact. - CNC machined 7075-T6 aluminum - Rise-adjustable: 28-33mm - Reach-adjustable: 25/30mm - Fits 2005-current BoXXer, Fox 40, Dorado, and 2012-current 888 forks
TruVativ Descendant 35mm Stem
$85.99 - $99.99
Mix and Match might work for clothing, but not your mountain bike cockpit. The new Descendant stem is 3D forged from 7075 alloy, then machined for weight reduction, and is the perfect match for your Descendant bars. Built strong, to take on the world’s toughest trails, Descendant stems keep you pointed in the right direction. - Perfect match with Descendant handlebars - 3D forged 7075 - CNC machined for weight reduction - Four bolt handlebar clamp - Two bolt steerer clamp
Spank Spoon 318 Stem
$64.99 - $84.99
- Strong yet competitively lightweight alloy single crown stem for all disciplines - Unique style, modern geometry, and rock-solid construction, without the heavy price tag - Dial your fit with micro-increment size options, tuned to fit any rider size and style - Cockpit setup index lasered onto stem helps with tuning of upsweep and backsweep - Ultra-short stack height and true zero-degree rise - Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars
Race Face Aeffect R 35 Stem
$79.99
Built for all-mountain riding, the new Aeffect Rally 35 stem is a no nonsense workhorse. With increased strength and shorter length options available for modern bike geometry, Aeffect R performs well above its price point…and all of this at a competitive weight.
Spank Spoon 350 Stem
$67.99 - $79.99
- Strong yet competitively lightweight alloy single crown stem for all disciplines - Unique style, modern geometry, and rock-solid construction, without the heavy price tag - Dial your fit with micro-increment size options, tuned to fit any rider size and style - Cockpit setup index lasered onto stem helps with tuning of upsweep and backsweep - Ultra-short stack height and true zero-degree rise - Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars - Recommended for: ASTM 5, All mountain, enduro, trail, free ride, DJ, E-Bike
Specialized Comp Multi Stem
$74.99 - $79.99
Specialized's Comp Multi Stem is forged and machined from 6061 aluminum for stiff, responsive handling. The 6-degree rise puts your bars in a position for improved control and the 31.8mm handlebar clamp is compatible with composite and aluminum handlebars.
Spank Spike Race 2 Stem
$68.99
- Micro Grain Refined (MGR) alloy - 5mm headset spacer included - 2D forged MGR alloy - CNC weight optimized - Shotpeen anodized - Key technologies: MGR, chamfered bar clamp - Material: 2D Forged MGR Alloy,CNC Weight Optimized - Length (mm) : 35 / 50 - Rise : 0 Degree - Diameter (mm): 31.8 - Stack height (mm): 35 - Weight (g): 150 (35mm) / 180 (50mm) - Finish: Shot peen anodized, laser logos
Spank Spoon 2 Stem
$57.99
- Unique style, modern geometry, and rock solid construction, without the heavy price tag - Suitable for all disciplines: Freeride, All Mountain, Enduro - Chamfered bar-clamps to reduce stress risers and increase fatigue life in handlebars - Ideal for shorter riders to improve the setup of their cockpit. - Length (mm): 40 - Rise: 0° - Diameter (mm): 31.8 - Stack height (mm): 35 - Weight (g): ±170 - Finish: Shot peen anodized, laser logos
49°N DLX Adjustable Stem
$52.99
Reduced weight and improved looks over traditional adjustable stems. - Provides 6 different angles by using the supplied shims and flipping the stem (+16, +12, +8, -8, -12, -16) - 172g 100mm length with one shim and top cap - Stylish bead blast black finish - 1-1/8 steerer, 31.8mm bar clamp
Evo E-Tec OS
$43.99
- 3D forged alloy construction - Fits 1-1/8-inch (28.6mm) steerer forks - Fits 31.8mm handlebar clamp - Heat treated hardware - Weight: 152g (100mm)
Page 1 of 2 Next page