Lighting

Gain more room or find the perfect position for lights, computers, music players, GPS, or whatever, with the Topeak BarXtender. Attaches securely to the handlebars or stem and adjusts for optimum position. - Clamp: Fits 22-38 mm tubes (shims included) - Crossbar: Device mount bar 25.4 mm - Material: Engineering Grade Plastic and Steel - Mount: Handlebar, Handlebar Stem - Size (L x W x H): 18 x 3 x 3 cm, 7.1” x 1.2” x 1.2” (folded) - Size (L x W x H): 13 x 10 x 3 cm, 5.1” x 3.9” x 1.2” (open) - Weight: 116 g / 4.08 oz

Our latest to-see-by headlight, the Flash 300 brings Flux-style beam control to a more budget-friendly pricepoint. The Flash headlight combines a clean, compact design with a simple-yet-elegant silicone strap that reminds us of a watchband design from our friends in Cupertino. With two different-sized straps included, you can dial in just the right amount of stretch to keep the Flash secure, while ensuring super fast install and removal. Now you see it, now you don't. Thanks to its 700mAh battery pack, the Flash 300 will deliver 300 lumens for 1.5 hours, all the way up to 75 lumens for 6 hours. In Flash mode, you get 150 lumens for 12 hours. - 700mAh rechargeable Li-ion battery pack is an economical choice that delivers real-world usable lumens and runtimes. Micro USB cable included. - Extra bright side lights to give you 180-degree visibility to other cyclists and motorists. - Flash mode: 150 lumens for 12:00 hours - IPX7 waterproof means this light will be there when you need it, even in the hardest rain. - Includes two different-sized straps to fit every round handlebar cockpit. (Flash headlights are not suitable for aero handlebars.) - Installs in seconds with a silicone strap system. Just pull the strap under the handlebar and drop it into the slot on the light body. - Single-LED oval beam pattern gives a perfect blend of spot and peripheral visibility. - Steady High mode: 300 lumens for 1:30 hours - Steady Low mode: 75 lumens for 6:00 hours - Steady Medium mode: 150 lumens for 3:00 hours

Put this little bright spot anywhere—your belt, your backpack, your seatpost—and ride on. The Flashback is your go-to savior, packing a mighty “I’m here!” punch to keep you visible on the streets. With its belt clip, you can literally clip it on just about anything, and its compact size makes it a total no-brainer for keeping your ride safe and your street-cred high. - Compact, bright, and waterproof. - Built-in fabric belt clip makes it a clip-anywhere taillight option (seatpost mount included). - Four operating modes: Steady (10 lumens), Power Flash (20 lumens), Disco Flash (14 lumens), Eco Flash (5 lumens). - 2- to 20-hour runtime, depending on mode. - Tested and approved for the following Specialized helmet models: Align, Ambush Comp, Chamonix, Propero II, Echelon II

See or be seen, day or night, with the Specialized Flux Elite headlight. It features a compact and lightweight design with an output of up to 400 lumens. Think of it like riding with a small car headlight on your bicycle. - Sculpted beam pattern puts light where you need it and maximizes every lumen. - Down-firing reflector creates smooth 180-degree wide beam for excellent peripheral vision. - Sharp cutoff illuminates objects 1/3 of a mile away without blinding oncoming motorists and cyclists. - New hinged quick-release mounting system for perfect alignment, every time. - New patent-pending all metal mounting system centers light in front of stem with longer reach to work under most computer mounts. - Wide variety of mounting options to fit all flat bar and drop bar cockpits. - Works with Flux Expert remote control (sold separately). - USB rechargeable 2200mAh Li-Ion internal battery (60% more capacity than previous iterations). - 200 to 400 lumens LED output. - Charges in less than 2.5 hours with supplied high power cable in any phone charger (3.5 hours in a laptop USB port). - Four operating modes: Full Power, 400 Lumens Battery Saver, 200 Lumens Surge, 120-400 Lumens Flash, 400 Lumens

You really can put a Specialized Stix headlight almost anywhere. This headlight mount is designed to cleanly integrate into the headset of the bike and maintain a clean look with the Stix positioned just under the stem. - Positions Stix headlight just under the stem in front of the head tube for a super-clean, integrated look. - Interlocking system between plastic mount and aluminum spacer allows the light and mount to quickly be removed from the bike. - Works with 1-1/8th Aheadset-style headsets and custom 10mm thickness spacer.

Increase your line of sight with the NiteRider Lumina Helmet Mount. By mounting your head light onto your helmet, it’ll allow you to see farther into your turn or wherever your head turns. System Compatibility: - Lumina Series - MiNewt Mini Series - Mako Series

SEEMEE 20 is a lightweight Micro-USB rechargeable tail light. Its high powered COB red LED light source producing a max output of 20 lumens, and is capable of 180° of visibility.

BREAKING THROUGH DESIGN CONCEPTION, BRINGS YOU REAL 360° VISIBILITY. POWERFUL LIGHT OUTPUT, LET YOU BE SEEN DAY AND NIGHT. SMART MODES SETTINGS, MAKE IT ALL HANDS FREE. - 360° Tracing light design - Smart motion sensor - Sensitive ambient light sensor - Low power mode - Smart battery indicator - IPX6 waterproof rate

SEEMEE 30 is a new version rear light with high transparent optical lens and ambient light sensor. - EFFICIENT ENERGY CONSUMING--SEEMEE 30 emits stronger light outputs while consuming less energy with high transparent lighting strap, more efficient lighting performance comparing to traditional red case tail light. - DESIGN FOR YOUR SAFETY-- SEEMEE 30 lets you be seen from up to 800 meters, and its elegant translucent anti-scratch case provides 230 degree high side visibility, to make you more visible at risk moments. - AMBIENT LIGHT SENSOR-- Sensitive infrared light sensor built-in, automatically change the light mode according to environment, thus to increase warning effect during the day. - LOW POWER MODE-- When battery level is lower than 5%, SEEMEE 30 automatically changes to economic flash mode, which can run up to 20 minutes before it totally powers off. - IPX6 WATERPROOF RATE-- Storm or wind, SEEMEE 30 will resist the water from anywhere in any challenging environment. - COMPATIBLE FOR ALL-- Multiple mounting methods, solid silicon strap can be mounted safely to different bar shapes conveniently. - MEMERY FUNCTION AND MULTI-MODES -- Satisfy different riding scenarios. - CONVENIENT USB  - SIZE: 61x14x21mm. - WEIGHT: 24g.

Lezyne's versatile Composite Matrix Helmet Mount is a durable and versatile accessory for Lezyne Mini XL, Power XL, Super XL, Deca and Mega Drives. It is constructed with lightweight and durable mold-injected Composite Matrix material for its base plate and spherical pivot. A strong rubber and Velcro strap attaches the mount to the helmet. The Composite Matrix spherical pivot and cradle allow the user to adjust the position of the light in all directions.

Featuring 800 lumens of crystal-clear illumination, the Lite Pro 800 Switch (High Volt) e-bike cycling light maximizes usable output with its enhanced Maximum Optical Reflection (MOR) lens while a compact CNC-machined aluminum body is equipped with cooling fins to maximize heat dissipation. Compatible with higher-voltage e-bike inputs (12-48v), the Lite Pro draws 8 watts during operation and easily plugs into batteries from top makers including Bosch, Shimano, and Yamaha. An integrated remote switch simplifies operation while the inclusion of both an e-bike stem mount and aluminum CNC fork mount maximize the light's versatility. A 130cm power cable is included. - Max Lumens: 800 - Weight: 173g

Bright and efficient multi-purpose e-bike cycling light. Durable, heat-dissipating CNC machined aluminum construction. Two ultrahigh-output LEDs deliver up to 500 lumens. Enhanced MOR (Maximum Optical Reflection) lens with built-in side visibility. Intelligent Auto Day/Night dim mode. E-bike compatible 6 – 12v input, 6w easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Includes CNC fork mount and 140cm long power cable. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make/model/battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. Disclaimer: Direct X-Lock Mounting System Not compatible with all stems. Please see installation manual for stem compatibility. - 500 Lumens - Includes aluminum CNC fork and E-BIKE Stem mount - Enhanced Maximum Optical Reflection (MOR) lens - E-bike compatible 12 – 48V input - 130 cm power cable included - IPX7 water resistant - Dimensions: 44.5 x 41 x 25mm / 1.75 x 1.61 x 0.98" Motor Compatibility - Bosch: 6V, 12V - Shimano: E5000, E7000, E6100, E6110, E9000, E8000, E8080, E6002, E6012 - Yamaha: PWse - BionX - Brose Drive S (2018) - Continental: 48V Prime, 48V Revolution

The Macro Drive 1300XXL is a new high-powered LED cycling light offering up to 1,300 lumens of output. It features our Tri-Focus optics, which creates a brighter center spot in a large wide-angle pattern. It’s constructed from machined aluminum and has cooling fins that optimize performance. The light is micro-USB rechargeable and it can run for up to a massive 148 hours on a full charge. A versatile strap secures it to a variety of handlebar sizes, and the 1300XXL is Remote Switch compatible. Specs - Max Lumens: 1300 - Weight: 208g - Max Runtime: 148 Hours (In Femto Mode) - Recharge Time: 3:30Hours

3 LED - Waterproof - Shockproof - ABS plastic - Flash – Steady - 2 batteries AAA (included - Blister Pack - Red