Other

In-bike storage and essential riding tools that can meet the needs of almost any trailside repair. Durable, flexible storage sleeves make for a secure, clean place to stow EnCase System tools or other small items. Fits most mountain bars and most road bars thanks to a storage sleeve with a customizable rubber flap that can be cut to meet your handlebar inner diameter. - 14 functions (spoke wrench; valve core wrench; flat head #3.5; Phillips #2; 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, and 8mm hex; and T10, T25, and T30 Torx) - Magnets & O-rings keep all parts in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar when ball detent swivel head is bent for extra torque - Store in handlebar with a Wolf Tooth EnCase Storage Sleeve (included) - Magnet on bottom end of tool allows for storage on steel bike stands (or refrigerators) - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops) - Chain & Tire Plug tool compatible with all bicycle chains including 12-speed - Inserter tool and bacon strips plug holes in tubeless tires - Five strips included; refills available - Hardened steel pin for lifetime durability - Requires 4mm hex for chain tool driver which can be found on the EnCase Hex Bit Wrench - Storage sleeves made of vibration-damping material and snug fit prevents rattling - Durable precision-machined aluminum end caps - Custom fit rubber flap can be trimmed to fit in smaller diameter bars - Bonus storage space—fits a Presta-to-Schrader adapter and valve core or a master link (both sold separately) - Includes Drop Bar Fit Kit to customize fit for larger-diameter road handlebars

Developed in the cold Minnesota weather, Wolf Tooth Singletrack Pogies handle the ever-changing winter weather while keeping hands warm. - Easy hand access - Adjustable cuff allows you to adapt the warmth of the pogie based on the weather conditions and how hard you are working - With the cuffs folded down the hand opening flares open and provides coverage up to your wrist - Velcro, snap, and strap cinch seal around handlebar and cables - Patent-pending design with three distinct warmth settings: Warmest (cuff up, zipped up), Warmer (cuff up, zipper open), Warm or Singletrack Mode (cuff folded down) - Waterproof and durable rip-stop nylon construction Compatibility - Fits most flat bars. The inner diameter of the handlebar should be between 17mm and 20mm. For most carbon bars and lighter aluminum bars, it is helpful to wrap a few layers of electrical tape around the plugs before inserting into the bars and tightening the screws. Tech Specs - Weight: 280g / 20g plugs - Material: 420D Diamond Rip-Stop Nylon laminated with jersey and closed-cell foam. Fabric is waterproof but seams are not waterproof sealed. - Includes: Two Pogies and two durable quick-disconnect handlebar plugs

Allows Thule Yepp Maxi to be quickly installed on any bike with a rear rack with a load capacity of 25 kg/55 lbs. Features: - Fits rear racks measuring 11-17 cm/4.5-6.7 in

The Tacx trainer mat protects your floor and muffles the noise of your indoor training sessions. - Large and rollable trainer mat - Made from high quality, water-repellent 6mm thick foam - Protects your floor against scratches and sweat - Muffles noise and vibrations - 180 x 85 cm

Stands for Thumb Over Grip System. Thumb grips to hold on to when you ride on top of the bars. Superior control, comfort and climbing leverage along with extra hand positioning Featuring: - Rubber tips for comfort and shock absorption - 17° Tog rotation for ergonomics - Raised hoods work with all grips - Flex legs for easy install w/o removing grips - Made in the USA Flex legs over bar to install Lightly tighten until snug TOGS should rotate on bars if forced

2-bolt dropout mount, allowing a bike to be kept upright. - Made of durable aluminum - Compatible with: Crosstrail and Ariel A1 Disc bikes (up through MY14) - 2012-2014 Hardrock and Myka models - Crossroads and Expedition models (up to MY13) with 2-bolt dropout mount

This bike kickstand was developed specifically for the Turbo Tero, allowing you to keep your bike upright on its own. If you need to complete your kit or replace a bike kickstand, this two-bolt dropout mount kickstand will do the job for you. Turbo Vado, Como, and Tero EQ come already equipped with a kickstand. - Durable aluminum construction. - Simple, two-bolt dropout mount allows for easy assembly. - Fits 40mm adapter plates. - Length: 362mm

Customize the decal colour of your OneUp Carbon Handlebar with this vinyl decal kit. Also includes extra decals for your bike, helmet, truck or dog*. *OneUp does not recommend applying decals to animals.

If you're not looking for chain retention or your bike has an integrated chain guide, you can still add some bash protection with the OneUp ISCG05 Underbash. The Underbash includes 3 different sizes of bash plate for compatibility with chainrings from 28-36T. Designed for frames with 2 ISCG05 tabs only (Evil, Rocky Mountain, etc). Should not be used on frames with 3 ISCG05 tabs.

- Axle mount - Made of steel - Fits 16-inch wheel bikes

- Center mount - Made of alloy - Button type tool-free adjust - 26'' to 700C

- Center mount - Made of steel - Adjustable with lockscrew - Fits bikes with 24-inch to 700C wheels

- For mounting a bottle cage to 22.2mm handlebars - Bottle cage not included

Alloy construction with steel top plate. - 305 mm long - Universal fit

Adjustable steel kickstand. - Axle-mount

Double leg kickstand for optimum stability. - Durable alloy construction - Mid-mount