When it's time to upgrade or replace your fork, United's Supreme Fork has you covered in a tough, wallet-friendly package. Made from post-weld, heat-treated 4130 butted chromoly, the legs are tapered and fluted for weight-savings and compliance during big hits. You also get a internal and externally machined 1-piece steerer tube with integrated bearing race. And, a 28mm offset delivers responsive handling, while the curved legs accommodate a 2.4" tire. • 4130 heat-treated seamless chromoly • Clearance for 2.4" tires • Updated steerer tube with improved strength in key stress areas • Internal and externally machined 1-piece steerer tube with integrated bearing race • Butted, fluted tapered legs • Fits up to 44mm outside diameter pegs • Clearance on inside for all front hub/hub guard setups • New M24 threading for top cap further improving strength
4Q Baked heat treated 4130 CrMo 3/16" thick ultra-machined drops radius cut on the steer tube superlight machined cap 2 lbs 3.6 oz *Glossy coating
Light (actually, very light)? Check. Easy to set up? Check. RockShox ride quality? Check. Too good to be true? Not if you are referring to the RockShox 30 Gold, featuring Motion Control damping. - Motion Control damping featuring low speed compression adjustment to lockout - Fast Black aluminum upper tubes - Solo Air spring
- Protective neoprene and velcro cut-To-Fit boot fits most rear shocks
Using left and right specific investment cast drop-outs instead of traditional Cr-Mo plate, we’ve eliminated the weld gap on the inside of the drops, and were able to thicken up the drops toward the top making a much stronger drop-out/leg connection. Seamless, swaged legs provide more strength than welded or fused caps-especially if pegs are installed. The ends of these legs are formed, not capped and welded so there is nothing to fracture. A longer 166mm CNC’d steerer tube with increased wall thicknesses wherever possible and a 24mm x 1.5 compression cap with integrated race. Tapered and butted legs provide tons of strength, crown weld surface, and peg clearance. Post weld 4Q Baked heat-treatment
CrMo Straight 33mm Offset, 3/8" dropout Matte finish
Introducing the Cane Creek Helm, a 7-way adjustable suspension fork optimized for 140mm to 170mm of travel. Born in the mountains of Western North Carolina, Helm is designed to conquer aggressive trail, enduro racing, and anything in between. By isolating each damping and air spring adjustment, the Helm has the ability to be tuned for all types of terrain and riding styles and gives the rider ultimate control of their suspension set-up. WEIGHT - 2070 grams DAMPING - High Speed Compression, Low Speed Compression, Low Speed Rebound ADJUSTMENTS - 7-way adjustable suspension fork - High speed compression - Low speed compression - Low speed rebound - Air volume adjust (8-position Internal indexed system) - Independent positive air spring - Independent negative air spring - Indexed travel adjust system SPRING - High volume positive and negative air springs STANCHION DIAMETER - 35mm TRAVEL - Positioned at 150mm, 160mm, or 170mm from factory Optimized for 140 - 170mm of travel TRAVEL ADJUSTMENTS - Internal, 10mm Increments (170mm down to 100mm) 2 Travel spacers included AXLE / SPACING / OFFSET - "D-Loc" 15mm thru axle system / 15mm x 110 BOOST spacing / 44mm
The Acid V2 fork is constructed from heat-treated chromoly tubing that's been beefed up in high stress point areas for maximum strength and ready to take some serious riding abuse. The 30mm offset invest cast dropouts are designed for all types of riding.
3T's Luteus Team is an all-carbon cyclocross fork designed for use with disc brakes. It features include a tapered steerer and aluminum-faced fork ends for precise handling and simple wheel changes. It supports brake calipers for use with standard 160mm brake rotors. The left fork blade is reinforced at the brake mounting pillars to compensate for the stresses imparted by disc braking. On its outer face, there is a recessed channel with two integrated fixing points for tidy brake cable/hose management. Plus, the fork ends face forwards and have aluminum inserts to better resist the lateral stresses transmitted through the hub by rough terrain.
Rigida is a lightweight, all-carbon fiber fork for race and sport bikes that share the DNA of 3T’s all-conquering Funda range. Rigida has a simplified fork-blade section compared to Funda, less aerodynamic, but laterally more rigid. Rigida’s oval-section fork-blades taper to narrower ends than Funda’s aerofoil blades, making the fork’s appearance more conventional. Top model Rigida Ltd is finished in Unidirectional Gloss Black, with silver pinstripes and 3T logo at the shoulders in white. Choice of tapered steerers for fitment to the latest-generation carbon-fiber framesets.
Page 1 of 1