Filter By:
- 24-Inch & Smaller (14)
- 26-Inch (7)
- 650B/27.5-Inch (14)
- 29-Inch (8)
- 700c, 27-Inch & 650c (9)
- Show More Sizes
- Show Fewer Sizes
Wheels
$144.99
The Rampage rear wheel features a sealed bearing hub, 14mm axle and a Rampage double-walled rim.
- Axle: 14mm chromoly (heat-treated)
- Driver: 1-pc chromoly RHD or LHD
- Driver bearings: 6802 (x2), verify bearing number on side of rubber seal
- Driver pawls: 3 Pawl
- Driver spring: Wraparound (x1)
- Hardware: Steel (17mm wheel nuts)
- Hub shell bearings: 6902 (x2) verify bearing number on side of rubber seal
- Drilling: 28h
- Includes Stolen PVC rim strip
- Weight: 38.35-ounce
$334.99
- 6069 rim material with 30mm internal width, delivers impressive rim durability and impact resistance
- 4.5mm offset improves spoke (28h) tension balance, increasing wheel performance and fatigue life
- Trace hubs deliver eMTB rated strength for every rider
$539.99
- 6069 rim material with 30mm internal width, delivers impressive rim durability and impact resistance
- 4.5mm offset improves spoke (32h) tension balance, increasing wheel stiffness and strength
- Trace hubs deliver eMTB rated strength for every rider with 10 degrees of engagement
$674.99
Being a company of mountain bikers, when Race Face set out to design a new wheel the goal was simple: make the wheel they want to ride.
R is for rally.
HUB
- Large oversize flange for improved bracing angle
- Larger bearings
- No bearing adjuster
- Wider bearing stance
- 6 double tooth pawls (3 engage at a time)
- 120 points of engagement (3 degrees)
- Each pawl has its own spring
- Balanced spoke counter bore
- Tool-free interchangeable end caps (sold separately)
RIM
- 30mm Internal width tubeless ready rim
- 4.5mm Offset – Improves spoke balance and wheel stiffness
- New stronger alloy for highest impact resistance of any Race Face or Easton rim
- High gloss black water transfer logos
$539.99
Being a company of mountain bikers, when Race Face set out to design a new wheel, their goal was simple, "Make the wheel we want to ride."
HUB
- Large oversized flange for improved bracing angle
- Larger bearings
- No bearing adjuster
- Wider bearing stance
- Balanced spoke counter bore
- Tool-free interchangeable end caps (sold separately)
RIM
- 30mm Internal width tubeless ready rim
- 4.5mm Offset – Improves spoke balance and wheel stiffness
- New stronger alloy for highest impact resistance of any Race Face or Easton rim
- High gloss black water transfer logos
$539.99
Being a company of mountain bikers, when Race Face set out to design a new wheel the goal was simple: make the wheel they want to ride.
R is for rally.
HUB
- Large oversize flange for improved bracing angle
- Larger bearings
- No bearing adjuster
- Wider bearing stance
- 6 double tooth pawls (3 engage at a time)
- 120 points of engagement (3 degrees)
- Each pawl has its own spring
- Balanced spoke counter bore
- Tool-free interchangeable end caps (sold separately)
RIM
- 30mm Internal width tubeless ready rim
- 4.5mm Offset – Improves spoke balance and wheel stiffness
- New stronger alloy for highest impact resistance of any Race Face or Easton rim
- High gloss black water transfer logos
$104.99
Tough-yet-affordable 16-inch (305mm ISO) single wall front wheel that uses a much higher build standard and materials than many original factory-equipped wheels.
- Alex Y303 pinned construction single wall rim with 24mm internal width for an excellent pairing with modern high-volume tires
- Anodized brake track for clean looks
- Joytech alloy nutted hub w/serviceable cup and cone bearings
- Plain gauge 14G/2.0mm Stainless Steel spokes (black) w/12mm brass nipples (silver)
- Weight: 680g
$98.99
Tough-yet-affordable 18-inch (355mm ISO) single wall BMX wheelset that uses a much higher build standard and materials than many original factory-equipped wheels.
- Alex Y303 pinned construction single wall rim with 24mm internal width for excellent pairing with modern high-volume tires
- Anodized brake track for clean looks
- Joytech alloy nutted hubs w/serviceable cup-and-cone bearings
- Straight gauge 14G/2.0mm Stainless Steel spokes (black) w/12mm brass nipples (silver)
- Weight: 758g
$163.99
Tough-yet-affordable single wall 20-inch (406mm ISO) BMX wheel that uses a much higher build standard and materials than many original factory-equipped wheels.
- Alex Y303 pinned construction single wall rim with 24mm internal width for an excellent pairing with modern high-volume tires
- Anodized brake track for clean looks
- Joytech alloy nutted hubs w/serviceable cup-and-cone bearings
- Thread-on singlespeed freewheel fitting (1.375" x 24 TPI) - 16-22T compatible
- Straight gauge 14G/2.0mm Stainless Steel spokes (black) w/12mm brass nipples (silver)
- Weight: 877g
$109.99
Tough-yet-affordable single wall 20-inch (406mm ISO) BMX wheel that uses a much higher build standard and materials than many original factory-equipped wheels.
- Alex Y303 pinned construction single wall rim with 24mm internal width for an excellent pairing with modern high-volume tires
- Anodized brake track for clean looks
- Joytech alloy nutted hub w/serviceable cup-and-cone bearings
- Straight gauge 14G/2.0mm Stainless Steel spokes (black) w/12mm brass nipples (silver)
- Weight: 857g
$249.99
Durable, stealth all-black BMX wheel spinning on premium sealed cartridge bearings throughout and with a sealed 9T driver.
- Pinned construction double-wall rim with a generous 28mm internal width for an excellent pairing with tires up to 2.4 wide
- 14mm Cr-Mo male axle rear (sealed bearings all-round)
- Anodized black brake track for clean looks when used with brakeless setups
- 9T sealed driver
- Straight gauge 14G/2.0mm Stainless Steel spokes (black) w/12mm brass nipples (black)
- Weight: 1289g
$184.99
Durable, stealth all-black BMX wheel spinning on premium sealed cartridge bearings throughout.
- Pinned construction double-wall rim with a generous 28mm internal width for an excellent pairing with tires up to 2.4 wide
- Stronger female nutted front alloy hub (Cr-Mo axle) for optimized use with pegs
- Anodized black brake track for clean looks when used with brakeless setups
- Straight gauge 14G/2.0mm Stainless Steel spokes (black) w/12mm brass nipples (black)
- Weight: 982g
$129.99
Tough-yet-affordable single wall rear 20-inch (406mm ISO) coaster wheel that uses a much higher build standard and materials than many original factory-equipped wheels.
- Alex Y303 pinned construction single wall rim with 24mm internal width for an excellent pairing with modern high-volume tires
- Anodized brake track for clean looks when used with coaster only
- KT 305R Nutted 110mm OLD steel coaster hubs w/serviceable cup-and-cone bearings
- Compatible w/3-spline coaster hub sprockets; 16T & 18T included for gearing options
- Straight gauge 14G/2.0mm Stainless Steel spokes (black) w/12mm brass nipples (silver)
- Weight: 1329g
$139.99
A tough, tubeless-compatible 27.5 disc wheelset in new-school boost thru-axle spacing
- Pinned construction double wall rim with new-school 29mm internal width, tubeless compatibility, offset/asymmetrical construction, and hook-less construction
- Asymmetric rims w/offset spoke holes for better triangulation of spoke angles and balance of tensions in a wheel build, resulting in a stronger, stiffer and more reliable wheel
- Joytech Boost thru-axle alloy 6-Bolt hubs w/ serviceable cup and cone bearings
- Shimano steel freehub: 8/9/10/11sp MTB compatibility
- 6-Bolt disc compatible only
- Reinforced head plain gauge 14G/2.0mm Stainless Steel spokes (black) w/12mm brass nipples (black)
- 32H/3X lacing
- Presta drilling
- High-pressure rim tape included (non-tubeless)
- Tubeless compatible
- Weight: 1076g
$220.99
A tough, tubeless-compatible 27.5 disc wheelset in new-school boost thru-axle spacing.
- Pinned construction double wall rim with new-school 29mm internal width, tubeless compatibility, offset/asymmetrical construction, and hook-less construction
- Asymmetric rims w/ offset spoke holes for better triangulation of spoke angles and balance of tensions in a wheel build, resulting in a stronger, stiffer, and more reliable wheel
- Joytech Boost thru-axle alloy 6-Bolt hubs w/ serviceable cup and cone bearings
- Shimano steel freehub: 8/9/10/11sp MTB compatibility
- 6-Bolt disc compatible only
- Reinforced head plain gauge 14G/2.0mm Stainless Steel spokes (black) w/12mm brass nipples (black)
- 32H/3X lacing
- Presta drilling
- high-pressure rim tape included (non-tubeless)
- Tubeless compatible
- Weight: Front - 1076g, Rear: 1177g
$229.99
A tough, tubeless-compatible 27.5-inch disc wheelset in traditional non-boost thru-axle spacing.
- Pinned construction double-wall rim with new-school 29mm internal width, tubeless compatibility, offset/asymmetrical construction, and hookless construction
- Asymmetric rims w/offset spoke holes for better triangulation of spoke angles and balance of tensions in a wheel build, resulting in a stronger, stiffer, and more reliable wheel
- Joytech thru-axle alloy 6-Bolt hubs w/serviceable cup and cone bearings
- Shimano steel freehub: 8/9/10/11sp MTB compatibility
- 6-Bolt disc compatible only
- Reinforced head straight gauge 14G/2.0mm Stainless Steel spokes (black) w/12mm brass nipples (black)
- Weight: 1191g
$139.99
A tough, tubeless-compatible 29-inch disc wheel in traditional non-boost thru-axle spacing.
- Pinned construction double-wall rim with new-school 29mm internal width, tubeless compatibility, offset/asymmetrical construction, and hookless construction
- Asymmetric rims w/offset spoke holes for better triangulation of spoke angles and balance of tensions in a wheel build, resulting in a stronger, stiffer, and more reliable wheel
- Joytech thru-axle alloy 6-Bolt hubs w/serviceable cup and cone bearings
- 6-Bolt disc compatible only
- Reinforced head straight gauge 14G/2.0mm Stainless Steel spokes (black) w/12mm brass nipples (black)
- Weight: 1110g
$129.99
An affordable, single-wall 700c classic-looking freewheel-compatible wheel with premium Stainless Steel spokes and a durable 36H construction.
- Alex Rims AP18 pinned construction classic box-section single-wall rim brushed sidewalls a generous 18mm internal width for compatibility with a wide range of tire widths
- Joytech nutted alloy hubs w/serviceable cup and cone bearings
- Conventional thread-on freewheel fitting (8/9/10sp compatible) — axle can be respaced for 5/6/7sp compatibility
- Straight gauge 2.0mm SUS304 Stainless Steel spokes (silver) w/12mm brass nipples (silver)
- Weight: 1237g
$149.99
A thru-axle 700c disc wheel with convenient dual Center Lock/6-Bolt disc that is perfectly suited to modern road, CX, or gravel applications.
- A lightweight (470g), pinned construction double-wall rim with new-school 23mm internal width, tubeless compatibility, offset/asymmetrical construction, and hookless bead profile
- Asymmetric rims w/offset spoke holes for better triangulation of spoke angles and balance of tensions in a wheel build, resulting in a stronger, stiffer, more compliant, and more reliable wheel
- Joytech thru-axle alloy Center Lock hubs w/serviceable cup and cone bearings
- Ships with CL-to-6-Bolt adapter and lockring full dual Center Lock/6-Bolt compatibility
- Reinforced head plain gauge 14G/2.0mm SUS304 Stainless Steel spokes (black) w/12mm brass nipples (black)
- 32H/3X lacing
- Presta drilling
- High-pressure rim tape included (non-tubeless)
- Tubeless Compatible
- Weight: 948g
$191.99
A 700c 6-Bolt disc wheelset with full 8/9/10/11sp road cassette compatibility that is perfectly suited to modern road, CX, or gravel disc applications.
- A lightweight (470g), pinned construction double wall rim with new-school 21mm internal width and offset/asymmetrical construction for better triangulation of spoke angles and balance of tensions, resulting in a stronger, stiffer, and more reliable wheel.
- Joytech alloy QR hubs w/serviceable cup and cone bearings
- 11sp Shimano road steel freehub body w/1.85mm freehub spacer for full 8/9/10/11sp compatibility
- 6-Bolt disc compatible only
- Reinforced head plain gauge 14G/2.0mm SUS304 Stainless Steel spokes (black) w/12mm brass nipples (black)
- 32H/3X lacing
- Presta drilling
- QR levers & high-pressure rim tape included
- Not tubeless compatible
- Weight: 1231g
$258.99
A thru-axle 700c disc wheel with convenient dual Center Lock/6-Bolt disc and full 8/9/10/11sp compatibility that is perfectly suited to modern road, CX, or gravel applications.
- A lightweight (470g), pinned construction double-wall rim with new-school 23mm internal width, tubeless compatibility, offset/asymmetrical construction, and hookless bead profile
- Asymmetric rims w/offset spoke holes for better triangulation of spoke angles and balance of tensions in a wheel build, resulting in a stronger, stiffer, more compliant, and more reliable wheel
- Joytech thru-axle alloy Center Lock hubs w/serviceable cup and cone bearings
- 11sp Shimano road steel freehub body w/1.85mm freehub spacer for full 8/9/10/11sp compatibility
- Ships with CL-to-6-Bolt adapter and lockring full dual Center Lock/6-Bolt compatibility
- Reinforced head plain gauge 14G/2.0mm SUS304 Stainless Steel spokes (black) w/12mm brass nipples (black)
- 32H/3X lacing
- Presta drilling
- High-pressure rim tape included (non-tubeless)
- Tubeless Compatible
- Weight: 1159g
Previous page
Page 2 of 2