Parts

A traditional round drop meets modern materials and the result is 3T's Rotundo LTD. It's constructed of high-modulus carbon fiber with varying wall thicknesses that results in a lightweight and strong bar that's also super stiff for sprinting and climbing. Double cable grooves provide a smooth feel when you're on the tops.

A traditional saddle clamp for use with vintage, older and inexpensive seatposts without an integrated clamp. - For use only with plain/pin-style seatposts that require a separate saddle clamping mechanism at the top - One bolt tightens the clamp to the rest of the seatpost and to the saddle rails at the same time. - 22.2mm / 7/8 fit with angle adjustment via serrated washers - Steel construction with ED black finish

Threaded bolt-on caliper style pads - 40mm pad length

Gel rubber construction for the optimum balance of comfort and durability. - Diamond pattern provides excellent grip - 90mm length

Forged Alloy seat-clamp with QR lever.

Lightweight one-piece Polypropylene thermoplastic pedals with in-molded grip nodes. - Proportionally smaller platform size is perfect for smaller-sized feet - Durable 7mm boron steel axle - Loose ball bearing axle assembly - Built-in reflectors included - 9/16" / 1/2" axle options - 300g per pair - Dimensions: 93 x 87mm

Lightweight, strong 1-piece Polypropylene thermoplastic body - Tough 7mm boron steel axle - Engineered Polymer Bearing replaces traditional loose ball bearings for a simpler, lighter construction and smoother spinning pedal - Fineline reflectors included (removable) - 9/16" axle - Dimensions: 110.5 x 100.5mm - Black - 301g per pair

- 25.4mm bar clamp - 620mm width with 10 backsweep

Lightweight one-piece Polypropylene thermoplastic pedals with in-molded grip nodes. - Durable boron steel axle - Loose ball bearing axle assembly - Built-in reflectors included - 309g per pair - 9/16" / 1/2 axle options - Dimensions: 100 x 86mm

Durable alloy construction - Compatible with standard saddle-clamp assemblies - 350mm length

Durable alloy construction - Quick and easy 1-bolt adjustment - 400mm length

Lightweight and strong forged alloy stem. - Adjustable between 0 and +60 - Removable face plate for easy installation

Lightweight and durable 2D forged-alloy stem. - Removable faceplate for easy bar installation - 4-bolt clamp for optimal handlebar support - High rise for improved riding comfort - 35 degree rise

A wider width saddle with generous levels of padding that offers excellent comfort and support for upright riding positions with a distinct rearward weight bias (think handlebars slightly higher than the saddle) and those looking to boost comfort levels a great all-arounder! - Ships with a traditional saddle clamp (7/8 fit) for dual compatibility with both older/traditional seatposts without an integrated clamp and newer seatposts with a built-in clamp - Plush, deep padding provides effectively counters the increased weighting with the rearward riding position, providing an optimum level of comfort and a nice buffer between the rider and road - Rearward located v-shaped pressure relief channel helps alleviate localized pressure on the sensitive perineum area and keep the blood flowing - Construction: Synthetic weatherproof upper, Nylon base w/ Hi-Ten steel rails - Dimensions: L 228 x W 182mm - Weight: 396g (excl. saddle clamp)

Lightweight and strong forged alloy stem. - Adjustable between 0 and +60 - Removable face plate for easy installation. - 180mm quill length.

Cutting edge NASA-derived memory-foam technology combines with a modern, ergonomic design for the ultimate in saddle fit and comfort! - Comfort Plus temperature-sensitive memory-foam upper inserts adapt perfectly to your body form while the sit-bone-positioned low-density base inserts form an effective barrier between surface and rider, dissipating shocks and reducing peak pressure. - Ergo cut-out completely removes all material around the soft tissue area to help alleviate localized pressure and reduce pain and numbness for both male and female riders alike. - 175mm width is suited to more neutral riding positions with a balanced front & rear weight distribution (Hybrid/City/Trekking) - Construction: Nylon base w/ Hi-Ten steel rails & synthetic weatherproof upper - Dimensions: L 275 x W 175mm - Weight: 410g

Cutting edge NASA-derived memory-foam technology combines with a modern, ergonomic design for the ultimate in saddle fit and comfort! - Comfort Plus temperature-sensitive memory-foam upper inserts adapt perfectly to your body form while the sit-bone-positioned low-density base inserts form an effective barrier between surface and rider, dissipating shocks and reducing peak pressure. - Ergo cut-out completely removes all material around the soft tissue area to help alleviate localized pressure and reduce pain and numbness for both male and female riders alike. - 190mm width is suited to Amsterdam-style riding positions with a distinctly upright, rearward weight bias position (Cruiser/Comfort/Town) - Construction: Nylon base w/ Hi-Ten steel rails & synthetic weatherproof upper - Dimensions: L 265 x W 190mm - Weight: 436g

- 45mm travel - 30.9mm seatpost diameter - 350mm length - 60 to 180kg rider weight - Adjustable suspension pre-load via hex key adjuster - High-quality broached internal keyways provide many years of trouble-free use - 15mm offset - 2-bolt clamp

The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment -- Qwik-Adjust Barrel Adjuster Bend Zone

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

- Includes stainless steel bolts - 40mm fits 200mm Front and 180mm Rear Rotors

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Clean up your control center with Avid's Matchmaker clamp. It combines the mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can drop some grams and keep your bar nice and tidy.

Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote (sold separately) for maximum convenience and ease of use.

Cost effective stopping power from the leader in cable-actuated disc brakes. - All calipers have 74mm mounting bolt spacing - For use with with long cable-pull levers - Mono-block caliper design has outboard pad adjustment - Spring tension is adjustable - Includes steel-backed organic pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull - Rotor Included: No - Weight: 215 g

Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.

Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote for maximum convenience and ease of use.

Perfect for your road, touring and cross bike, Avid's BB7 Road brakes have all the power you need. Used with your road-style levers, they provide precision actuation as well as tool-free pad replacement. Plus, Avid's ingenious Tri-Align caliper-positioning system perfectly aligns the pads parallel to the rotor in seconds for powerful braking with positive modulation in any condition.

Our Shimano M9100 Narrow/Wide Snaggletooth chainring features our highly sought-after tooth profile. Combine this chainring with any modern-day clutch derailleur and never worry about dropping a chain again. - Highly sought after Bi Directional narrow-wide tooth design provides excellent chain retention without a chain guide - Direct mount for Shimano M9100, M8100, and M7100 and perfect for 1x setups - Features a perfect 51mm to 55mm chainline, depending on axle length and spacer configuration - CNC'd in Canada from 7075 aluminum with laser-etched graphics